Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Light Kits

 Checkout
LK-0029YW 1/10 or 1/8 Body Shell Cover  TRON LED Wire Light Tube Kit Set Yellow
LK-0029YW 1/10 or 1/8 Body Shell Cover TRON LED Wire Light Tube Kit Set Yellow
Customise your model with this 1500mm long led wire. Create a unique or unsual design or go along with Tron. Suitable for 1.10 scale models and can be used on 1.8 however note you may need additional units. 4.8 to 8.4v ni-mh or li-po input. Can be plugged into the spare port on your receiver using its installed JR male plug. Note no body shell mount accessories are included with this item. The wire can not be cut to length.
:
Price: £10.99
TL-001 1/10 Scale Body Shell Direct Roof Mount RC Police Light Bar LED Tamiya
TL-001 1/10 Scale Body Shell Direct Roof Mount RC Police Light Bar LED Tamiya
To suit 1.10 scale model car or truck shells. This is a direct roof mount, so will need a few holes drilled in the center roof of your shell plus one larger hole directly in the middle of the bar for the wires to feed through. This is powered by a 7.2v tamiya input. cable provided and shown in the picture. This needs to be connected inline with a 7.2v tamiya battery. Can also be powered by a 6v input without using the tamiya cable. Works with a JR or futaba receiver or direct 6v futaba or JR female battery pack. Light cover measures 113.9mm long x 24.22mm wide.
:
Price: £12.99
Out of Stock


TL-005 1/10 Scale Racing Car Truck Body Shell 10 LED Light Kit 6v JR Tamiya
TL-005 1/10 Scale Racing Car Truck Body Shell 10 LED Light Kit 6v JR Tamiya
2 Red LEDs 4 Amber LEDs 4 White LEDs. To suit 1.10 scale models car or truck shells. Simple 10 LED lighting system recommended for use with lighting buckets which are not included. Simple on off switch. This set would be powered by the receiver which must be running by an esc or have a 6v DC input if using two servos for nitro models. Any 27mhz 35mhz 40mhz AM or FM or 2.4ghz receiver should work. Can also be powered by the included tamiya cable, to be used inline with a 7.2v tamiya battery.
:
Price: £7.99
Out of Stock
YA-0246SV 1/8 1/10 Scale Truggy Truck Rock Crawler Body Shell Cover Light Bar
YA-0246SV 1/8 1/10 Scale Truggy Truck Rock Crawler Body Shell Cover Light Bar
Give your model a touch of uniquness with these body shell accessories. Simply mount to the shell using the screws included. Image for illustration only. Other than the item described and shown at the top of the listing other parts shown and model not included.
:
Price: £3.99
Out of Stock


YA-0248SV 1/8 1/10 Scale Truggy Truck Rock Crawler Body Shell Cover Light Set
YA-0248SV 1/8 1/10 Scale Truggy Truck Rock Crawler Body Shell Cover Light Set
Give your model a touch of uniquness with these body shell accessories. Simply mount to the shell using the screws included. Image for illustration only. Other than the item described and shown at the top of the listing other parts shown and model not included.
:
Price: £4.99
 

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.