Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Light Kits

 Checkout
L-005 1/10 Scale Body Shell Direct Roof Mount RC Police Light Alarm Red
L-005 1/10 Scale Body Shell Direct Roof Mount RC Police Light Alarm Red
To suit 1/10 scale model car or truck shells. This is a direct roof mount so will need a few holes drilled for this to be placed. This is powered by either a direct 6v input no batteries included or by a spare port on your receiver. The connector type is male JR. Note Input by a voltage higher than 6v DC will damage the unit.Simple 1 page instructions included to help with fitting.
:
Price: £7.99
Out of Stock
L-006 1/10 Scale Body Shell Direct Roof Mount RC Police Light Alarm Yellow Amber
L-006 1/10 Scale Body Shell Direct Roof Mount RC Police Light Alarm Yellow Amber
To suit 1/10 scale model car or truck shells. This is a direct roof mount so will need a few holes drilled for this to be placed.This is powered by either a direct 6v input no batteries included or by a spare port on your receiver. The connector type is male JR.Note Input by a voltage higher than 6v DC will damage the unit.Simple 1 page instructions included to help with fitting.
:
Price: £7.99
Out of Stock


L-007 1/10 Scale Racing Car or Truck Body Shell Simple 4 LED Light Kit 6v Futaba
L-007 1/10 Scale Racing Car or Truck Body Shell Simple 4 LED Light Kit 6v Futaba
2 Red LEDs. 2 White LEDs. To suit 1/10 scale models car or truck shells. Simple 4 LED lighting system recommended to be used with lighting buckets not included. Simple on off switch. This set would be powered by the receiver any 27mhz / 35mhz / / 40mhz AM/FM or 2.4ghz which must be running by an esc or have a 6v DC input if using two servos for nitro models.
:
Price: £5.99
Out of Stock
L-008 1/10 Scale Racing Car / Truck Body Shell Simple 10 LED Light Kit 6v JR
L-008 1/10 Scale Racing Car / Truck Body Shell Simple 10 LED Light Kit 6v JR
2 Red LEDs. 4 Amber LEDs. 4 White LEDs. To suit 1/10 scale models car or truck shells. Simple 10 LED lighting system, recommended to be used with lighting buckets (not included). Simple on off switch. This set would be powered by the receiver (any 27mhz / 35mhz / 40mhz AM/FM or 2.4ghz) which must be running by an esc or have a 6v DC input if using two servos for nitro models.
:
Price: £7.99


L-016 1/10 Scale Racing Car Truck Body Shell Roof Bonnet Eagle Decal Mount Light
L-016 1/10 Scale Racing Car Truck Body Shell Roof Bonnet Eagle Decal Mount Light
To suit 1/10 scale models car or truck shells. Requires a thin long 19mm hole drilled and cut for the wires to feed through. Using the double sided tape included 1 small square attach the eagle decal to the body shell.Features a simple push button switch to change lighting modes. The lighting mode can be toggled by hittin the ch3 button on your remote for 3c remotes only. This set would be powered by the receiver any 27mhz / 35mhz / / 40mhz AM/FM or 2.4ghz which must be running by an esc or have a 6v DC input if using two servos for nitro models.
:
Price: £10.99
 

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.