Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Drive Hexes

 Checkout
N10179S 1/10 Scale Aluminium Alloy Pin Drive Wheel Hex Hub 7mm M7 Silver x 4
N10179S 1/10 Scale Aluminium Alloy Pin Drive Wheel Hex Hub 7mm M7 Silver x 4
To suit 1.16 scale models using a drive hex with pin behind the hex. 7mm measured across the flats. M12 socket. 4mm screw hole in the center. For use with included 1.5mm x 6.7mm pins. 3.74mm depth.
:
Price: £5.80
N10180LB 02134 1/10 Aluminium Alloy Drive Wheel Hex Hub 12mm M12 Light Blue 7mm
N10180LB 02134 1/10 Aluminium Alloy Drive Wheel Hex Hub 12mm M12 Light Blue 7mm
To suit 1.10 scale models using a drive hex with pin behind the hex. 12mm measured across the flats. M12 socket. 5mm screw hole in the center. For use with included 2mm x 10mm pins. 7mm depth.
:
Price: £5.80
Out of Stock


N10180O 02134 1/10 Scale Alloy Pin Drive Wheel Hex Hub 12mm M12 Orange x 4 7mm
N10180O 02134 1/10 Scale Alloy Pin Drive Wheel Hex Hub 12mm M12 Orange x 4 7mm
To suit 1.10 scale models using a drive hex with pin behind the hex. 12mm measured across the flats. M12 socket. 5mm screw hole in the center. For use with included 2mm x 10mm pins. 7mm depth.
:
Price: £5.80
N10180R 02134 1/10 Scale Alloy Pin Drive Wheel Hex Hub 12mm M12 Red x 4 7mm
N10180R 02134 1/10 Scale Alloy Pin Drive Wheel Hex Hub 12mm M12 Red x 4 7mm
To suit 1.10 scale models using a drive hex with pin behind the hex. 12mm measured across the flats. M12 socket. 5mm screw hole in the center. For use with included 2mm x 10mm pins. 7mm depth.
:
Price: £5.80


N10181G 1/10 M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Green 4 Ext. 30mm
N10181G 1/10 M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Green 4 Ext. 30mm
This will fit 1.10 models using a 12mm hub. Note not suitable for 2WD which uses bearings instead. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 12mm hubs with these adapters. Great if looking to put 1.8 scale 17mm hex wheels on your model and extending out by 30mm. How to check if this will fit. First simply check all 4 wheels use a 12mm hub already. You will still need these hubs. Then check the axle is 4mm in diameter at the thread. This will fit all 1.10 HSP models. How to install. These slot onto the 12mm hub fitted to a 4mm thread axle. Use the silver bolt to secure the hub in place with the 4mm threaded center. Next put a 17mm hex wheel on the end and secure using the included 17mm nut. Heres whats in the pack and the respective measurements. 4 x 12mm to 17mm adapters. 38mm measured end to end. 5mm center hole for a 8mm diameter axle. 4 x silver bolts. 34.5mm end to end. 4mm center thread. 8mm hex end across flats not corners. 4 x nuts with 17mm hex and 12mm thread. Please note:these are not suitable for 2WD models using bearings instead of 12mm hex hubs.
:
Price: £18.99
Out of Stock
 

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.