Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Drive Hexes

 Checkout
N10178O 1/10 Scale M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Orange x 4
N10178O 1/10 Scale M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Orange x 4
This will fit 1.10 models using a 12mm hub. Note not suitable for 2WD which uses bearings instead of hex hubs. Please check measurements below before ordering as this will not fit all models. Simply replaces the normal 12mm hubs with these adapters. Great if looking to put 1.8 scale 17mm hex wheels on your model. To check these will fit simply check all 4 wheels use a 12mm hub already. You will still need these hubs. Check that the axle thread is 4mm in diameter. These will fit all 1.10 HSP models. To install slot onto the 12mm hub fitted to a 4mm thread axle. Use the silver bolt to secure the hub in place using the 4mm threaded center. Next put a 17mm hex wheel on the end and secure using the included 17mm nut. Included in the pack and with the following measurements are 4 x 12mm to 17mm adapters. 23.09mm measured end to end. 5mm center hole for a 8mm diameter axle. 4 x silver bolts 19.42mm end to end. 4mm center thread. 8mm hex end measured across flats not the corners. 4 x nuts with 17mm hex and 12mm thread. Please note that these are not suitable for 2WD models using bearings instead of 12mm hex hubs.
:
Price: £16.99
Out of Stock
N10178P 1/10 Scale M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Purple x 4
N10178P 1/10 Scale M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Purple x 4
This will fit 1.10 models using a 12mm hub. Note not suitable for 2WD which uses bearings instead of hex hubs. Please check measurements below before ordering as this will not fit all models. Simply replaces the normal 12mm hubs with these adapters. Great if looking to put 1.8 scale 17mm hex wheels on your model. To check these will fit simply check all 4 wheels use a 12mm hub already. You will still need these hubs. Check that the axle thread is 4mm in diameter. These will fit all 1.10 HSP models. To install slot onto the 12mm hub fitted to a 4mm thread axle. Use the silver bolt to secure the hub in place using the 4mm threaded center. Next put a 17mm hex wheel on the end and secure using the included 17mm nut. Included in the pack and with the following measurements are 4 x 12mm to 17mm adapters. 23.09mm measured end to end. 5mm center hole for a 8mm diameter axle. 4 x silver bolts 19.42mm end to end. 4mm center thread. 8mm hex end measured across flats not the corners. 4 x nuts with 17mm hex and 12mm thread. Please note that these are not suitable for 2WD models using bearings instead of 12mm hex hubs.
:
Price: £16.99
Out of Stock


N10178R 1/10 Scale M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Red x 4
N10178R 1/10 Scale M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Red x 4
This will fit 1.10 models using a 12mm hub. Note not suitable for 2WD which uses bearings instead of hex hubs. Please check measurements below before ordering as this will not fit all models. Simply replaces the normal 12mm hubs with these adapters. Great if looking to put 1.8 scale 17mm hex wheels on your model. To check these will fit simply check all 4 wheels use a 12mm hub already. You will still need these hubs. Check that the axle thread is 4mm in diameter. These will fit all 1.10 HSP models. To install slot onto the 12mm hub fitted to a 4mm thread axle. Use the silver bolt to secure the hub in place using the 4mm threaded center. Next put a 17mm hex wheel on the end and secure using the included 17mm nut. Included in the pack and with the following measurements are 4 x 12mm to 17mm adapters. 23.09mm measured end to end. 5mm center hole for a 8mm diameter axle. 4 x silver bolts 19.42mm end to end. 4mm center thread. 8mm hex end measured across flats not the corners. 4 x nuts with 17mm hex and 12mm thread. Please note that these are not suitable for 2WD models using bearings instead of 12mm hex hubs.
:
Price: £16.99
Out of Stock
N10178S 1/10 Scale M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Silver x 4
N10178S 1/10 Scale M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Silver x 4
This will fit 1.10 models using a 12mm hub. Note not suitable for 2WD which uses bearings instead of hex hubs. Please check measurements below before ordering as this will not fit all models. Simply replaces the normal 12mm hubs with these adapters. Great if looking to put 1.8 scale 17mm hex wheels on your model. To check these will fit simply check all 4 wheels use a 12mm hub already. You will still need these hubs. Check that the axle thread is 4mm in diameter. These will fit all 1.10 HSP models. To install slot onto the 12mm hub fitted to a 4mm thread axle. Use the silver bolt to secure the hub in place using the 4mm threaded center. Next put a 17mm hex wheel on the end and secure using the included 17mm nut. Included in the pack and with the following measurements are 4 x 12mm to 17mm adapters. 23.09mm measured end to end. 5mm center hole for a 8mm diameter axle. 4 x silver bolts 19.42mm end to end. 4mm center thread. 8mm hex end measured across flats not the corners. 4 x nuts with 17mm hex and 12mm thread. Please note that these are not suitable for 2WD models using bearings instead of 12mm hex hubs.
:
Price: £16.99
Out of Stock


N10179P 1/10 Scale Aluminium Alloy Pin Drive Wheel Hex Hub 7mm M7 Purple x 4
N10179P 1/10 Scale Aluminium Alloy Pin Drive Wheel Hex Hub 7mm M7 Purple x 4
To suit 1.16 scale models using a drive hex with pin behind the hex. 7mm measured across the flats. M12 socket. 4mm screw hole in the center. For use with included 1.5mm x 6.7mm pins. 3.74mm depth.
:
Price: £5.80
 

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.