Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Drive Hexes

 Checkout
N10158 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Orange 4 23mm 12mm Nut
N10158 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Orange 4 23mm 12mm Nut
This will fit some 1.8 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 17mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit. First simply check all 4 wheels use a 17mm hub already and that the axle is 8mm in diameter. Then check that the hole in the axle is 2.5mm. If there is no hole these wont be suitable. How to install. These slot onto a 8mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 17mm hex on the end and then screw on the end nut. Here's whats in the pack and the measurements. 4 x 17mm extension hubs which measure as follows. 23mm long extension measured end to end. 8mm center hole for a 8mm diameter axle. 4 x 2.5mm x 14mm pins. 4 x rubber o-rings. Please note these are not suitable for 2WD models using bearings instead of hex hubs.
:
Price: £12.99
N10160 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Red 4 30mm 12mm Cap
N10160 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Red 4 30mm 12mm Cap
This will fit some 1.8 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 17mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit. First simply check all 4 wheels use a 17mm hub already and that the axle is 8mm in diameter. Then check that the hole in the axle is 2.5mm. If there is no hole these wont be suitable. How to install. These slot onto a 8mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 17mm hex on the end and then screw on the end nut. Here's whats in the pack and the measurements. 4 x 17mm extension hubs which measure as follows. 23mm long extension measured end to end. 8mm center hole for a 8mm diameter axle. 4 x 2.5mm x 14mm pins. 4 x rubber o-rings. Please note these are not suitable for 2WD models using bearings instead of hex hubs.
:
Price: £14.99
Out of Stock


N10161 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Silver 4 30mm 12mm Cap
N10161 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Silver 4 30mm 12mm Cap
This will fit some 1.8 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 17mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit. First simply check all 4 wheels use a 17mm hub already and that the axle is 8mm in diameter. Then check that the hole in the axle is 2.5mm. If there is no hole these wont be suitable. How to install. These slot onto a 8mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 17mm hex on the end and then screw on the end nut. Here's whats in the pack and the measurements. 4 x 17mm extension hubs which measure as follows. 23mm long extension measured end to end. 8mm center hole for a 8mm diameter axle. 4 x 2.5mm x 14mm pins. 4 x rubber o-rings. Please note these are not suitable for 2WD models using bearings instead of hex hubs.
:
Price: £14.99
Out of Stock
N10164 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Purple 4 30mm 12mm Cap
N10164 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Purple 4 30mm 12mm Cap
This will fit some 1.8 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 17mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit. First simply check all 4 wheels use a 17mm hub already and that the axle is 8mm in diameter. Then check that the hole in the axle is 2.5mm. If there is no hole these wont be suitable. How to install. These slot onto a 8mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 17mm hex on the end and then screw on the end nut. Here's whats in the pack and the measurements. 4 x 17mm extension hubs which measure as follows. 23mm long extension measured end to end. 8mm center hole for a 8mm diameter axle. 4 x 2.5mm x 14mm pins. 4 x rubber o-rings. Please note these are not suitable for 2WD models using bearings instead of hex hubs.
:
Price: £14.99
Out of Stock


N10165 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Black 4 30mm 12mm Cap
N10165 1/8 M17 17mm Wheel Hex Hub Extension Adapter Alloy Black 4 30mm 12mm Cap
This will fit some 1.8 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 17mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit. First simply check all 4 wheels use a 17mm hub already and that the axle is 8mm in diameter. Then check that the hole in the axle is 2.5mm. If there is no hole these wont be suitable. How to install. These slot onto a 8mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 17mm hex on the end and then screw on the end nut. Here's whats in the pack and the measurements. 4 x 17mm extension hubs which measure as follows. 23mm long extension measured end to end. 8mm center hole for a 8mm diameter axle. 4 x 2.5mm x 14mm pins. 4 x rubber o-rings. Please note these are not suitable for 2WD models using bearings instead of hex hubs.
:
Price: £14.99
Out of Stock
 

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.