Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Drive Hexes

 Checkout
N10129 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Yellow Alloy
N10129 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Yellow Alloy
This will fit some 1.10 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 12mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit? Firstimply check all 4 wheels use a 12mm hub already. Then check the axle is 4mm in diameter. Also check that a 4mm nut was originally used to secure the wheel in place and note that this will no longer be needed. Check the hole in the axle is 2mm. If there is no hole these wont be suitable. The hole should be on the smooth section of axle before the threaded section. How to install? These slot onto a 4mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 12mm hex hub on the end and then install the included washer and screw.
:
Price: £10.99
N10130 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Black Alloy 25mm
N10130 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Black Alloy 25mm
This will fit some 1.10 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 12mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit? Firstimply check all 4 wheels use a 12mm hub already. Then check the axle is 4mm in diameter. Also check that a 4mm nut was originally used to secure the wheel in place and note that this will no longer be needed. Check the hole in the axle is 2mm. If there is no hole these wont be suitable. The hole should be on the smooth section of axle before the threaded section. How to install? These slot onto a 4mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 12mm hex hub on the end and then install the included washer and screw.
:
Price: £10.99


N10133 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Green Alloy 25mm
N10133 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Green Alloy 25mm
This will fit some 1.10 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 12mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit? Firstimply check all 4 wheels use a 12mm hub already. Then check the axle is 4mm in diameter. Also check that a 4mm nut was originally used to secure the wheel in place and note that this will no longer be needed. Check the hole in the axle is 2mm. If there is no hole these wont be suitable. The hole should be on the smooth section of axle before the threaded section. How to install? These slot onto a 4mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 12mm hex hub on the end and then install the included washer and screw.
:
Price: £10.99
N10134 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Grey Alloy 25mm
N10134 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Grey Alloy 25mm
This will fit some 1.10 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 12mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit? Firstimply check all 4 wheels use a 12mm hub already. Then check the axle is 4mm in diameter. Also check that a 4mm nut was originally used to secure the wheel in place and note that this will no longer be needed. Check the hole in the axle is 2mm. If there is no hole these wont be suitable. The hole should be on the smooth section of axle before the threaded section. How to install? These slot onto a 4mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 12mm hex hub on the end and then install the included washer and screw.
:
Price: £10.99
Out of Stock


N10135 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Silver Alloy 25mm
N10135 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Silver Alloy 25mm
This will fit some 1.10 models. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 12mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. How to check if this will fit? Firstimply check all 4 wheels use a 12mm hub already. Then check the axle is 4mm in diameter. Also check that a 4mm nut was originally used to secure the wheel in place and note that this will no longer be needed. Check the hole in the axle is 2mm. If there is no hole these wont be suitable. The hole should be on the smooth section of axle before the threaded section. How to install? These slot onto a 4mm axle and then are secured in place by a 2mm pin which is included. A rubber ring is then placed over the pin to keep it in position. Slot the wheel onto the 12mm hex hub on the end and then install the included washer and screw.
:
Price: £10.99
 

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.