Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Drive Hexes

 Checkout
N10181O 1/10 M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Orange 4 Ext. 30mm
N10181O 1/10 M12 12mm to M17 17mm Wheel Hex Hub Adapter Alloy Orange 4 Ext. 30mm
This will fit 1.10 models using a 12mm hub. Note not suitable for 2WD which uses bearings instead. Please check measurements below before ordering as this will not fit all. Simply replaces the normal 12mm hubs with these adapters. Great if looking to put 1.8 scale 17mm hex wheels on your model and extending out by 30mm. How to check if this will fit. First simply check all 4 wheels use a 12mm hub already. You will still need these hubs. Then check the axle is 4mm in diameter at the thread. This will fit all 1.10 HSP models. How to install. These slot onto the 12mm hub fitted to a 4mm thread axle. Use the silver bolt to secure the hub in place with the 4mm threaded center. Next put a 17mm hex wheel on the end and secure using the included 17mm nut. Heres whats in the pack and the respective measurements. 4 x 12mm to 17mm adapters. 38mm measured end to end. 5mm center hole for a 8mm diameter axle. 4 x silver bolts. 34.5mm end to end. 4mm center thread. 8mm hex end across flats not corners. 4 x nuts with 17mm hex and 12mm thread. Please note:these are not suitable for 2WD models using bearings instead of 12mm hex hubs.
:
Price: £18.99
Out of Stock
T10128 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Black Alloy 25mm
T10128 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Black Alloy 25mm
This will fit some 1.10 models. Please check measurements below before ordering as this will not fit all. This simply replaces the normal 12mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. Here's how to check if this will fit. First simply check all 4 wheels use a 12mm hub already. Then check the axle is 4mm in diameter and also check that a 4mm nut was originally used to secure the wheel in place. This nut will no longer be needed. The hole in the axle is 2mm. If there is no hole these wont be suitable. The hole should be on the smooth section of axle before the threaded section. Here's how to install. These slot onto a 4mm axle and then are secured in place by a 2mm pin which is included. Slot the wheel into place. The silver bolt pictured then screws into the hub and onto the 4mm axle in place of the m4 nut originally previously used. Whats included and corresponding measurements. 4 x 12mm extension hubs which measure 25.5mm long extension measured end to end. 5mm center hole for a 5mm silver bolt. 4 x 2mm x 10mm pins. Please note that these are not suitable for 2WD models. These will not replace bearings. For these to fit your model must already use 12mm hubs and have a 2mm hole in a 4mm diameter axle.
:
Price: £14.99
Out of Stock


TD10058 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Black Alloy 20mm
TD10058 1/10 Scale Wheel Hex Hub M12 12mm Extension Adapter x 4 Black Alloy 20mm
This will fit some 1.10 models. Please check measurements below before ordering as this will not fit all. This simply replaces the normal 12mm hubs with these extensions. Great if intending to put larger wider wheels on or if simply needing to push the wheels away from the chassis. Here's how to check if this will fit. First simply check all 4 wheels use a 12mm hub already. Then check the axle is 4mm in diameter and also check that a 4mm nut was originally used to secure the wheel in place. This nut will no longer be needed. The hole in the axle is 2mm. If there is no hole these wont be suitable. The hole should be on the smooth section of axle before the threaded section. Here's how to install. These slot onto a 4mm axle and then are secured in place by a 2mm pin which is included. Slot the wheel into place. The silver bolt pictured then screws into the hub and onto the 4mm axle in place of the m4 nut originally previously used. Whats included and corresponding measurements. 4 x 12mm extension hubs which measure as follows. 20.45mm long extension measured end to end. 5mm center hole for a 5mm silver bolt. 4 x 2mm x 10mm pins. Please note that these are not suitable for 2WD models. These will not replace bearings. For these to fit your model must already use 12mm hubs and have a 2mm hole in a 4mm diameter axle.
:
Price: £12.99
Out of Stock
 

« | 10 | Next »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.