Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Engine Parts » Pull Starters

 Checkout
Behemoth / SY HSP Pull Starter
Behemoth / SY HSP Pull Starter
Designed to fit 14mm hexs (standard 18. engine HSP) Please Note: Their is two kinds of starter for 1/10 hsp models, please check the distance between holes on your pull starter is 32mm. If not you require the smaller version.
:
Price: £11.99
Out of Stock
Pull Start Screws M2.8 x 8mm Long
Pull Start Screws M2.8 x 8mm Long
Now cap screws
Price: £2.00


R025x3P RO25 Pull Starter 12mm Hex One Way Bearing 6mm Shaft ( M12 ) x 3
R025x3P RO25 Pull Starter 12mm Hex One Way Bearing 6mm Shaft ( M12 ) x 3
Replacement 12mm one way bearing for nitro engines. Will suit most models with a 6mm engine shaft installed. Check to ensure your model is using a 6mm diameter shaft. 12mm hex measured across the flats.
:
Price: £14.99
R025x5P RO25 Pull Starter 12mm Hex One Way Bearing 6mm Shaft ( M12 ) x 5
R025x5P RO25 Pull Starter 12mm Hex One Way Bearing 6mm Shaft ( M12 ) x 5
Replacement 12mm one way bearing for nitro engines. Will suit most models with a 6mm engine shaft installed. Check to ensure your model is using a 6mm diameter shaft. 12mm hex measured across the flats.
:
Price: £19.99


SH .18 and .21 Engine Pull Starter
SH .18 and .21 Engine Pull Starter
Measures 27mm top right to top left fixing hole, 15mm depth. Has a space for a 12mm (M12 socket size) starter rod. Not suitable for one way bearings, order R020 starter instead. Note: starter designed to fit SH engines or similiar size (measurements above), SH starters dont feature a plate to secure the center string wheel. When removing tape, please ensure the center does not fall out as this not covered by any guarantee or returns.
:
Price: £11.99
 

« | 1 | 2 | 3 | Next »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.