Racing Car Body Shell - Navy Blue Cut
Brand New Painted Body Shell to fit Racing 1.10 Scale HSP Nitro Cars. Please check measurements below if fitting to other models.
The shell is 460mm long and 200mm wide (measured at center, 195mm at wheel arch width) and 120mm high.
Measures 260mm between wheel arches.
The item comes painted, but not drilled so you can customise it to fit your model exactly. Decals have been applied and no extra are included.
If you are after any shell cutting scissors please ask as we have them available for only £3.99 (you can cut this shell with normal scissors, but the shell scissors are more accurate and are angled for the corners of the shell).
How to check it will fit your model?
Simple check the measurements above will come your chassis.
If so then this can be customised to fit. Note: This will not fit all 1/10 models.
Two headlights and two rear red brake lights installed.
Requires a 6v input, can be powered by using a Y connector or spare port fitted to your receiver or by direct 6v input. Futaba male housing 3 pin connector installed.