Welcome to Black Smith Products ::
Product Search
RC HELP & ADVICE

RC ACCESSORIES
Batteries/Chargers

Body Covers

RC Accessories

Engine

Engine Starters

Exhausts

Fixtures

Motors + Heatsinks

RC (electrics)

Spares / Upgrades

Tools

Wheels and Tyres

Information

Whats New?




Bookmark this site!







Home » Nitro Starters » Roto Starters

 Checkout
11003 Starter Rod
11003 Starter Rod
If you have a cordless drill then you dont have to buy another electric starter drill. You can now purchase the starter rod and backplate seperate. Just add the gear size and backplate size suited for your engine (sizes below in backplate description). If you are just replacing the starter rod, please do not select the below options except the terms). Designed for .18 engines or smaller. Includes 5mm hex end starter rod (not pin like shown).
:
:
:
Price: £4.99
11011 Small Backplate
11011 Small Backplate
Distance between center of fixed holes across is 27mm (same for all sides). Hex Gear Size is 12mm or 14mm Standard (for the one way bearing). To select gear please see below. Note: Image for illustration only (12mm gear backplate sent has 3 screw holes instead of 4, starting position is offset to the top right instead).
:
:
Price: £8.99


11012 Large Backplate
11012 Large Backplate
Distance between center of fixed holes across is 32mm (same for all sides). Hex Gear Size is 14mm Standard (for the one way bearing). To change please see below.
:
:
Price: £8.99
11020 Electric Roto Starter Backplate 8mm Gear E-Start With Starter Rod 5mm Hex
11020 Electric Roto Starter Backplate 8mm Gear E-Start With Starter Rod 5mm Hex
Suitable for .07 SH nitro engines. Please check backplate measurements before ordering. 21mm top right to top left fixing hole. 8mm hex gear. Note that one way bearing is not included. Also note that starter rod has a 5mm hex on one end only. Dogbone drive shaft style end on the other side to fit into this backplate.
:
Price: £12.99
Out of Stock


11020 Really Small Drill Cover 1/16 .07 SH Nitro Engine
11020 Really Small Drill Cover 1/16 .07 SH Nitro Engine

:
:
Price: £8.99
Out of Stock
 

« Previous | 1 | 2 | 3 | »

*By Ordering with BlackSmithProducts LTD. You automatically agree to our terms and conditions.
*When ordering a run in nitro model, the terms and conditions on warranty will change,
please make sure you have read these changes…
*All pictures and text on our website is Copyright © BlackSmithProducts LTD.




Telephone: +44 (0) 1293 863 411 - Email: info@blacksmithproducts.co.uk
We accept Delta
We accept Visa Electron
We accept Maestro
We accept Mastercard
We accept Solo
We accept Switch
We accept Visa
Copyright © Black Smith Products. All rights reserved. Protected by copyright law protection act.